Linksys WRVS4400N - Manual (Page 24)

WRVS4400N User Guide 18
Overview
Connecting the Router
Connecting the Router
Overview
• To set up your network, you will do the following:
• Connect the Router to one of your PCs according to the instructions in this chapter.
• By default, Windows 98, 2000, Millennium, and XP computers are set to obtain an IP
address automatically, so unless you have changed the default setting, then you will not
need to configure your PCs. (If you do need to configure your PCs, refer to Windows
Help for more information.)
• Set up and configure the Router with the setting(s) provided by your Internet Service
Provider (ISP) according to
Chapter 6, "Setting Up and Configuring the Router" .
The installation technician from your ISP should have left the setup information with you after
installing your broadband connection. If not, you can call your ISP to request the information.
Once you have the setup information for your specific type of Internet connection, then you
can begin installation and setup of the Router.
Notebook with
Ethernet Adapter
PC with Ethernet
Adapter
Cable or DSL
Modem
Wireless-N Gigabit
Security Router
Internet