Linksys WRVS4400N - Manual (Page 148)

WRVS4400N User Guide 142
Configuring the VPN Settings for the VPN Routers
5. Click the VPN tab.
6. Click the IPSec VPN tab.
7. For the VPN Tunnel setting, select Enabled.
8. Enter a name in the Tunnel Name field.
9. For the Local Secure Group, select Subnet. Enter VPN Router 1’s local network settings in
the IP Address and Mask fields.
10. For the Remote Secure Group, select Subnet. Enter VPN Router 2’s local network settings in
the IP Address and Mask fields. Note that the subnet of Router 2 must be different than the
subnet of Router 1.
11. For the Remote Secure Gateway, select IP Addr. Enter VPN Router 2’s WAN IP address in the
IP Address field.
12. Click the Save Settings button.
Configuring VPN Router 2
Follow similar instructions for VPN Router 2.
1. Launch the web browser for a networked PC, designated PC 2.
2. Enter the VPN Router’s local IP address in the Address field (default is 192.168.1.1). Then
press Enter.
3. A password request page will appear. (Non-Windows XP users will see a similar screen.)
Complete the User Name and Password fields (admin is the default user name and
password). Then click the OK button.
4. If the LAN IP address is still the default one, change it to 172.168.1.1 and save the setting.
5. Click the VPN tab.
6. Click the IPSec VPN tab.
7. For the VPN Tunnel setting, select Enabled.
8. Enter a name in the Tunnel Name field.
9. For the Local Secure Group, select Subnet. Enter VPN Router 2’s local network settings in
the IP Address and Mask fields.
10. For the Remote Secure Group, select Subnet. Enter VPN Router 1’s local network settings in
the IP Address and Mask fields.
11. For the Remote Secure Gateway, select IP Addr. Enter VPN Router 1’s WAN IP address in the
IP Address field.
12. Click the Save Settings button.