Laerdal ALS Simulator Advanced - Manual

audio cable
Video cable
Power cable
USB cable
CONNECTINGTHE MONITOR CABLES TO THE
COMPUTER
Connect the Video cable to the Computer.
Connect the Audio cable to the
Computer headphone output -
BLACK mini jack with double wire.
Do NOT connect the USB cable yet.
INSTALL THE MONITOR ON THE COMPUTER
Right click on the Desktop and select Properties.
Select the Settings tab.
Select Display 2.
Set Resolution to 1280 x 1024 pixels.
Check Extend my Windows desktop
onto this monitor.
Click OK.
If promted:
Answer Yes to keep this setting.
CONNECT THE MONITOR TO THE USB HUB
Connect the Patient Monitor to the USB hub.
CALIBRATING THE TOUCH-SCREEN MONITOR
Double click on the elo logo in the system tray in the lower right
corner of the screen.
(If you cannot find it in the system tray, activate Elo Touchscreen in the
Control Panel).
VitalSim Vital Signs Simulator
During installation:
Make sure you accept the default settings and/or unblock, unless other
instructions are given in the Installation Guide and other instruction material.
I GET TO KNOW THE SUPPORT MATERIALS
- ALS Simulator Installation Guide - this document
- ALS Simulator DFU - included with your ALS Simulator
- VitalSim DFU - included with your VitalSim
- ALS Advanced Simulator Software help files on Software CD
II CHECK THAT ALL ITEMS ARE PRESENT
© 2010 Laerdal Medical AS All Rights reserved
draft PN 1005473 rev D
CHECK EQUIPMENT
(Images below are examples only. Actual components may vary.)
ALS Simulator Advanced system elements
ALS Simulator system - elements required for setup
ALS simulator with accessories:
- Control Unit
- Remote Control
- Power supply
- USB cable
- Manikin cable, 10 ft
- Black cable between for use
between Control Unit and
Remote Control
(not illustrated)
ALS Simulator Installation Guide
ALS Simulator Advanced accessories
Audio cable, 3-way
USB Camera
Box
Computer with accessories:
- Powersupply with cable
- USB mouse
Monitor with accessories:
- Video cable
- Powersupply with
cable
- USB cable
Cables NOT to be used
- Digital Video Cable
(white connectors)
- Audio Cable (2-way)
USB Hub Box
with Powersupply
and USB cable
ALS Simulator Advanced system - Installation Guide
START YOUR COMPUTER
Connect the mouse and power supply to the computer, and
turn on.
Make sure that your computer has the ALS simulator logo on
the screen.
INSTALL THE USB HUB
A USB hub is provided with the system to overcome potential problems of
having too few USB ports on the computer and to have fewer cables from
the computer in the manikin area.
Unpack the USB Hub from its box
Connect power to the USB Hub
Connect the USB Hub to the PC
CONNECT THE PATIENT MONITOR
Unpack the Patient Monitor and cables.
Do
NOT use the Software CD that comes with the monitor.
Route the cables through the Monitor Stand and connect the cables to the
monitor connectors:
- Video cable.
- USB cable.
- Audio cable - BLUE mini jack with single wire.
- Power cable.
Secure the cables using the strain reliefs on the monitor.
Connect the power cable between the power supply and a wall outlet,
and turn the monitor on.
1
2
3
To PC’s USB port To power adapter
Power plug
Audio plug Video plug USB plug
4
5
6
Click on the Align button on the
dialog that appears.
If target indicators first appear on the computer screen,
press Esc, or wait until they appear on the Patient Monitor.
When the target appears on the Patient Monitor, touch each target as it
changes position, and finally touch the green tic button.
CONNECT THE USB-CAMERA
Unpack the USB-camera
Connect the USB-camera to the USB-hub.
CONNECT THE CONTROL UNIT
Connect the USB cable between the Control Unit and the USB hub
Connect the Audio cable -WHITE mini jack with single wire to the
Control Unit.
Connect the Control Unit’s power supply between a wall outlet and the
Control Unit, and turn the Control Unit on.
CONNECT THE MANIKIN TO THE CONTROL UNIT
Unpack the ALS simulator and cables.
Connect the Simulator cable to the Control Unit.
UPDATE SOFTWARE IN MANIKIN, CONTROL UNIT
AND REMOTE CONTROL
Connection cannot be accessed if ALS software is running.
Start program update from the Start menu on your Computer..
Make sure that the control unit, the remote control and the manikin are
connected, then click “update selected device(s)”.
This program will automatically update all software.
Close program update when installation is finished.
If no connection is indicated, check your connections:
- Make sure Control Unit is on
- Make sure Remote Control is on and connected to control unit with
cable
7
8
9
10
11
You are now ready to start using your
ALS Simulator advanced system Power
Power
Power
Power
Video cable
Audio cable
USB Hub
USB camera
Monitor
A. Setup of ALS Simulator Advanced System elements
B. Setup of ALS Simulator System
VitalSim
Vital Signs Simulator
ALS setup guide EN.indd 1 21.01.2010 08:53:53