Two channel bridged configuration – Directed Electronics ORION 8004 User Manual
Page 9
Speaker Connections
Four Channel Stereo Configuration
●
Front and rear channel lowest recommended impedance is 2W stereo
●
Crossover mode, output, and gain configurations are independently adjustable
between the front and rear channels.
●
Two-channel or four-channel input can be used for this configuration. For source
unit fading, use the four-channel input mode.
●
Front and rear outputs can be configured for high-pass, low-pass, or full range
operation.
Two Channel Bridged Configuration
●
Front and rear channels are configured for bridged two-channel operation.
●
Lowest recommended impedance for both front and rear channels is 4W.
●
Crossover and gain configurations are independently adjustable between the
front and rear channels.
●
Two-channel operation is recommended for this operational mode.
●
Front and rear outputs can be configured for high-pass, low-pass, or full range
operation.
●
Front and rear outputs can be configured for stereo (right channels will have right
output, left channels will have left output) or summed two-channel operation
(front speaker bridged, rear speaker bridged).
8
©2003 Directed Electronics, Inc.