Legacy Audio Silhouette - Manual (Page 6)

6
Speaker Installation
There are several ways to install Silhouette, depending on which version you are using.
Select the wall locations for the Silhouette system. Try to create a 60 degree angle
horizontally between the speaker pair, relative to the listening position. This
usually results in a 10 foot horizontal spread between the speakers, center to center.
Recommended mounting height for the loudspeaker puts the wall bracket screw holes
at 61.5" off the floor. This may be adjusted slightly to acommodate the sight lines of the
mo
nitor."
If you have any doubts about your ability to properly install in/on-wall loudspeakers,
you should consider the services of a custom installer. If you plan to install them
yourself, always use high quality tools to save time and make the installation go more
smoothly. Determine the final location of both left and right speakers before drilling or
cutting any holes since changes to one speaker may affect the other either
aesthetically or acoustically. Look for pipes, wiring or any other conflicting material
that might be damaged before beginning the installation.
Silhouette On Wall Installation: Page 7
Silhouette Pro On Wall Installation: Page 8
Silhouette Pro In Wall Installation: Page 9
Precautions