Legacy Audio Whisper XDS - Manual (Page 12)

12
The Terminal Plate
At the rear of each of your loudspeakers you will find a terminal plate housing one pair of binding posts and two XLR Con-
nectors.
Hook the high level speaker inputs from the main amplifier to the pair of binding post. Be sure that you observe polarity
when making the connections. The positive (+) terminal of the amplifier should be connected to the positive terminal of the
loudspeaker. The negative (-) terminal of the amplifier should be connected to the negative terminal of the loudspeaker.
The Upper XLR input is fed directly from the processor output (Output #2 for the Left Speaker, Output #6 for the Right
Speaker)
The Lower XLR input is also fed directly from the processor output (Output #1 for the Left Speaker, Output #5 for the Right
Speaker)
Speaker Connections