LG Motorsports Track Box for C6, New Design User Manual
Page 11
13. To verify that your wiring is correct, simply start the car. It should start and function as normal with
no error messages present (unless there were any pre‐existing conditions causing a warning lamp),
as shown in Figure 13.
Figure 13
14. Once the wiring has been verified, turn off the vehicle. Plug the harness into the TrackBox “Track
mode” position (figure 12).
15. Restart the vehicle. It should start and function as normal, but the “Traction and Active Handling‐
OFF ” message will show in the DIC as shown in Figure 14.
Figure 14
Note: Proper functionality can be verified by pressing the ESC button, as outlined in the
Operation section of this document. Pressing it one time should turn both systems on, and all
warnings and lamps should be OFF.