Lingenfelter L650060505 Lingenfelter Pontiac GTO Air Intake 2005-2006 v4.0b User Manual
Page 6
Step 12 - If the vehicle is a 2005 model, skip to STEP 15.
On 2006 model year vehicles, inspect the aluminum AC
line that travels on top of the frame rail in the airbox area.
If the line is straight, as shown in the image to the right,
skip to STEP 15.
Step 13 - If the line is shaped as shown (see image), you
must remove the small perforated section of the air box
(STEP 14).
Step 14 - Using pliers, grasp a corner of the perforated
section. Use a twisting motion to remove the section,
twist in the same direction until free from the airbox.
Step 15 - Install the rubber seal pieces on the large radius
section and on the bottom section of the box. Be sure
that the pieces are pushed on as far as possible.
This image shows all of seals installed on the airbox wall.
The top seal will actually be installed in a later step.
Page 5 of 10