Section 2 – overview, Front panel, Rear panel – Lumagen Radiance 2021/2041 User Manual
Page 9: Hdmi connections, Audio output connection, Miscellaneous connections, Ront, Anel, Hdmi, Onnections
Section 2 – Overview
Radiance 2021 and Radiance 2041
rev 082813
3
Section 2 – Overview
Front Panel
The front panel has a light-emitting-diode (LED) indicator, which is red when the unit is in “standby” and, by
default, is green when the unit is “on.” Note: The green “on” indicator can be turned off if preferred.
Rear Panel
There are four HDMI inputs.
There are two HDMI audio/video outputs and one COAX audio output. Video can be output on one or both
of the HDMI outputs. Audio can be output on the HDMI outputs and/or the COAX output.
Additional connections are provided for wired IR command input (38 KHz IR format), RS232 command
input/update, plus the 12 VDC power input.
These connections are described on the following page.
HDMI Connections
2
HDMI SD/HD Outputs. HDMI1 supports video resolutions up to 1080p60 with support for
HDMI 1.4a audio formats.
4
HDMI SD/HD Inputs. Supports resolutions up to 1080p60
Note: CEC bit pass-through is connected from the HDMI inputs to HDMI Output 1.
Audio Output Connection
1
COAX Audio Output
Miscellaneous Connections
1
IR format command input (See Tech Tip 9 on the Lumagen.com website).
1
RS232. Used for command input and for software update (See Tech Tip 6 and 11).
1
Power Input (12 Volts DC)