Lumagen VisionHDQ - Manual (Page 16)

VisionHDQ ™
User Manual and Installer Guide
© 2004-2007 Lumagen®, Inc. 13 Rev 1.14
colorbar pattern and the red filter. Finally set the green color (COLGRN) and Hue (HUEGRN)
offsets using the green colorbar pattern and the green filter.
MENU → IN → CONFIG → COLR → COLR →
(COLR, HUE, COLRED, HUERED, COLGRN, HUEGRN) → […, †, ˆ, ‡] OK
• Select Advanced AVIA → Video Test Patterns → Special Tests → Y/C-Delay.
• Set Y/C Delay. Use the Lumagen Control to minimize the error in the blue and red timing
verses Luma. On the right part of the screen there are red bars on a yellow background. Adjust
to balance any color transition errors on the left and right edges of the red bars. The C
B
and
C
R
channels are calibrated independently.
MENU → IN → CONFIG → ADJ → YC-DLY → (CBCR, CB, CR) → […, †, ˆ, ‡] OK
• Copy the DVD configuration to all configuration memories (MENU → IN → COPY → OK).
• If desired, change to MEMB and calibrate for a different amount of room light. Then switch
back to MEMA, and again copy the DVD configuration to all configuration memories.
• Calibrate the other inputs.
• Name the inputs, if desired (MENU → CONFIG → IN → NAME → OK and follow directions).
• Set power-on message, if desired (MENU → MISC → POWR → MSG → […, †, ˆ, ‡] OK)
• Lock the configuration, if desired (MENU → MISC → LOCK → LOCKED OK)
• SAVE THE CONFIGURATION (MENU → SAVE → SAVE OK)