Luxul XWR-600 - Manual (Page 33)

33
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
w
Save: This button is used to Save the configuration changes made on this page.
Once you have clicked Save, you may move to other pages in the Router setup.
Most changes will require a Reboot to allow the changes to take effect.
w
Reboot: This button is used to Reboot the Router after making configuration
changes or can be used to Reboot the Router for any reason.
w
Cancel: This button Cancels any changes made on this page.
NOTE: After making any changes to the Guest Network you must click the
Save button to Save your changes, then you must click the Reboot
button for the changes to take effect. You can click the Save button
and proceed to other pages without losing your configured changes.
NOTE: WPA/WPA2 with TKIP&AES Encryption Security mode is
recommended for high turnover environments like Restaurants or
Hotels. This mode covers the widest range of devices.
NOTE: WEP Security is not recommended due to WEP being inherently
insecure. WEP is only recommended when devices do not support
WPA.
3.6 Firewall/Security
There are six submenus in the Firewall/Security menu: Port Forwarding, DMZ, UPnP, IP-
MAC Binding, URL Filtering and Client Filtering. Click a submenu to view and/or modify
the corresponding settings.
3.6.1 Port Forwarding
This page displays the Port Forwarding Rules configured on the Router.
Select the menu Firewall/Security>>Port Forwarding to display the following page: