Luxul ABR-4400 - Manual (Page 5)

Simply Connected
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
„
Computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include I.E. 10.0, Firefox 3.6, Safari 5.0, Chrome 10.0, Opera
10.6 and up. The Web browser is used to confi gure the ABR-4400.
„
Power must be AC 100-240V~ 0.1A 50/60Hz.
Before Connecting to the Network
The ABR-4400 can be rack-mounted or used as a desktop router. Before connecting
to the network, please be aware of the following requirements:
„
Install the ABR-4400 in a stable/safe place to avoid any possible damage
„
Make sure there is adequate space around the ABR-4400 for adequate ventila-
tion and proper heat dissipation. It is recommended to have at least 4-6 inches
around all sides.
„
Do not place heavy articles on the ABR-4400.
„
Power outlets should be within 5 feet of the ABR-4400.
„
Verify the ground connection of the outlet is functioning properly.
„
Check the power cord to confi rm a secure connection.
„
Avoid placement in direct sunlight.
„
When installing the ABR-4400 on a fl at surface, attach the rubber feet to the
bottom of the device to avoid scratching the surface.
ABR-4400 INSTALLATION
Installing the ABR-4400 in a Rack
The ABR-4400 can easily be installed in a standard 19” rack. The ABR-4400 includes two
mounting ears for installing and stabilizing the router. For attaching the mounting ears
and installing the switch within a rack, please refer to the following illustration:
Rack-Mounting the ABR-4400
„
Using the included screws, attach the mounting ears to each side of
the switch,.
„
Mount the router in the rack with the LEDs facing outwards. Be sure the
router is level and properly secured within the rack.