Luxul XMS-1024 - Manual (Page 5)

Simply Connected
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
PREPARING FOR INSTALLATION
System Requirements
f
Ethernet Cables to connect the XMS-1024 to Ethernet enabled devices
f
Computer equipped with a Web browser. Supported Web browser versions
include I.E. 9.0, Firefox 3.6, Safari 5.0, Chrome 6.0, Opera 10.6 and up. The Web
browser is used to configure the XMS-1024.
f
Power must be AC 100-240V~ 0.6A(Max) 50/60Hz.
Before Connecting to the Network
The XMS-1024 can be rack-mounted or used as a desktop switch. Before connect-
ing to the network, please be aware of the following requirements:
f
Install the XMS-1024 in a stable/safe place to avoid any possible damage
f
Make sure there is adequate space around the XMS-1024 for adequate ventila-
tion and proper heat dissipation. It is recommended to have at least 4-6 inches
around all sides.
f
Do not place heavy articles on the XMS-1024.
f
Power outlets should be within 5 feet of the XMS-1024.
f
Verify the ground connection of the outlet is functioning properly.
f
Check the power cord to confirm a secure connection.
f
Avoid placement in direct sunlight.
f
When installing the XMS-1024 on a flat surface, attach the rubber feet to the
bottom of the device to avoid scratching the surface.
XMS-1024 INSTALLATION
Installing the XMS-1024 in a Rack
The XMS-1024 can easily be installed in a standard 19” rack. The XMS-1024 includes two
mounting ears for installing and stabilizing the switch. For attaching the mounting ears
and installing the switch within a rack, please refer to the following illustration: