Luxul XMS-1024 - Manual (Page 37)

luxul.com | 14203 Minuteman Dr | Suite 201 | Draper, UT 84020 | p: 801-822-5450 | f: 801-822-5460
User Guide
37
Power Supply: Use only a Luxul approved power supply output rated at 100-240VDC
and minimum 0.6A. The power supply shall be Listed to UL/CSA 60950-1; and
certifi ed to IEC60950-1 and EN60950-1 with SELV outputs. The device can also
be powered from a compliant POE source. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.
6.2 FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions may cause harmful interfer-
ence to radio communications. However; there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
7: CONTACT LUXUL
For sales questions
please contact our
Sales Department
P: (801) 822-5450
E: [email protected]
If you experience any
problems, please contact
Technical Support
P: (801) 822-5450
E: [email protected]
To check for fi rmware updates or download pre-confi gured application modules,
visit
luxul.com .