Luxul XGS-1008 - Manual (Page 5)

Simply Connected
5
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
1 2 3 4 5 6 7 8 POWER
XGS-1008 Rear Panel View
CAUTION: Please use the included power supply. If a different power
supply is used, it could damage the XGS-1008
PREPARING FOR INSTALLATION
System Requirements
„
Ethernet Cables to connect the XGS-1008 to Ethernet enabled devices
„
Power should be AC 100-240V~ 0.1A(Max) 50/60Hz.
Installation Requirements
„
Install the XGS-1008 in a stable/safe place to avoid any possible damage
„
Inspect the AC power cord to ensure that it is correctly connected and
undamaged.
„
To avoid electric shock, DO NOT open the XGS-1008 housing (no user service-
able parts inside). Opening the XGS-1008 will void your warranty.
„
It is recommended that the XGS-1008 is positioned away from direct sun light
„
Ensure there is sufficient space around the XGS-1008 for proper ventilation and
heat dissipation. It is recommended to have at least 4-6 inches around all sides.
Before Connecting to the Network
Before connecting the XGS-1008 to the network, please check the following:
„
Determine placement location. Do not place any heavy articles on the XGS-1008.