Luxul XGS-1008P - Manual (Page 6)

Quick Install Guide XGS-1008P
a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XGS-1008P 029151044
6
„
Using the included screws, attach the mounting ears to each side of
the switch,.
„
Mount the switch in the rack with the LEDs facing outwards. Be sure the
switch is level and properly secured within the rack.
Desktop Setup
For use as a desktop device, position and apply the included rubber feet to the
bottom of the XGS-1008P.
Attaching the Rubber Feet to the XGS-1008P
Connecting Devices
Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect the XGS-1008P to a
device as described below. The XGS-1008P will automatically adjust to the charac-
teristics (speed/duplex) of the device to which it is connected. The PoE function is
autosensing. As long as the powered device is 802.3af/at compliant, the switch will
provide power.
NOTE: Legacy PoE devices that need more than 30Watts can not be
powered by the switch