LW Measurements TSB 1416 Planar Bench Scale - Manual (Page 2)

STANDARD OPERATION FEATURES:
This unit has the Pounds to Kilogram conversion feature. If this feature is
enabled, be sure that all calibration is done in Pounds. A second output has
been added to provide data to a remote computer or display separate from a
printer.
PANEL DESCRIPTIONS：
Front panel:
a. 0.54 inch 6 digit LED display
b. 6 LEDs for Motion,Ovld, Gross,Net,Ib,Kg
c. 5 function key
Annunciators:
MOTION: This light is on whenever the scale is motion.
OVLD: This light is on whenever the scale is overload
GROSS: Indicates that the indicator is displaying gross weight.
NET: Indicates that the indicator is displaying net weight.
Ib: Indicates the “lb” unit of the displayed weight.
Kg: Indicates the “kg” unit of the displayed weight.
-1-
KEY FUNCTION:
1. ZERO:
“Zero” feature works if load is between 0 to 100% of full capacity.
To bring the scale to a zero balance reading, press the ZERO button.
The button will not activate if the MOTION lamp is on.
2. ＊* (UNIT):
Push to switch between lb and kg. Each time the button is pushed,
the tare weight will be automatically cleared.
3. GROSS/NET:
Press this key switch between Gross or Net mode. The lamp will
Light to indicate which mode is being displayed.
4. TARE:
“Tare” feature works if load is between 0 to 100% of full capacity.
Multiple tare can be used provided the total mass does not exceed
the weighing capacity of the scale .
When the weight is stable(no motion), press the TARE button, and
hold for one display update. If the gross weight was not a negative
value, the tare weight now equals the gross weight and the display
will show a NET weight of zero.
5. PRINT:
Press this button to activate an optional printer.
-2-