LW Measurements LDS Large Drum Scale - Manual (Page 21)

21
4.2.2.2 Setting Backlight
Press and hold HOLD key, then press ON/OFF key to turn on
the Scale, display will show
“A ON” or “A OFF”, Press UNIT
key, display will show
“L ON”, “L OFF” or “L AU”, press ZERO
key to select back light On, Off or Au(auto)
4.2.2.3 Setting power-on mode
Press and hold HOLD key, then press ON/OFF key to turn on
the Scale, display will show
“A ON” or “A OFF”, Press UNIT
key three times, display will show
“J ON” or “J OFF”, press
ZERO key to select
“J ON” (means showing zero when scale
is turned on) or
“J OFF” (means showing the weight placed
when the scale is turned on).
4.2.3 Working mode settings
- Press & hold UNIT and HOLD keys, then press ON/OFF key
to turn on the scale
- The display will show Ani. Su, press UNIT key to enter,
press ZERO key to select ON (means animal weighing mode)
or OFF (means normal weighing mode), press HOLD key to
confirm.
- Press HOLD key again, display will show Ani. Kd, press
UNIT key to enter, press ZERO key to select anti-shock range
between 50, 100, 200 and 400, press HOLD key to confirm.
*** This is the anti shock range 50d, 100d, 200d or 400d. The
smaller division range is suitable for smaller animals, the
larger division range for larger animals
- Press HOLD key again, display will show Ani. Fd, press
UNIT key to enter, press ZERO key to select filter range