LW Measurements LVS 700 XL - Manual (Page 16)

16
4.2.1 Interface Settings

Press and hold HOLD key, and then press ON/OFF key to turn on the scale, display will show A-
ON or A-OFF

Press UNIT key, display will show “L-ON” or “L-OFF”

Press UNIT key again, display will show “P-XX”

Press ZERO key to select CON,OFF, KEY, STB
a) OFF stands for serial data output disabled
b) KEY stands for manual mode by pressing [PRINT]
c) STB stands for automatic print when scale is stable
d) CON stands for continuous print

Press ON/OFF key to turn off the Scale.
4.2.2 Function settings
4.2.2.1 Setting Auto Shut off
Press and hold HOLD key, then press ON/OFF key to turn on the Scale, display will show “A ON” or “A
OFF”, Press ZERO key to select Auto shut off mode “ON” or “OFF”.
4.2.2.2 Setting Backlight
Press and hold HOLD key, then press ON/OFF key to turn on the Scale, display will show “A ON” or “A
OFF”, Press UNIT key, display will show “L ON”, “L OFF” or “L AU”, press ZERO key to select back light
On, Off or Au(auto)
4.2.2.3 Setting power-on mode
Press and hold HOLD key, then press ON/OFF key to turn on the Scale, display will show “A ON” or “A
OFF”, Press UNIT key three times, display will show “J ON” or “J OFF”, press ZERO key to select “J ON”
( means showing zero when scale is turned on) or
“J OFF” (means showing the weight placed when the
scale is turned on).