LW Measurements Remo-R Indicator - Manual (Page 2)

PARTS DESCRIPTIONS ：
·TOP
·Display
1. ON/OFF: Turn the scale power on/off.
2. HOLD: Press this key to store weight value.
3. UNIT：Select weighing units：kg or lb .
4. ZERO：(for TARE)
This key is “Zero” feature if load is below 10% of full capacity or a
negative value. between 10% to full capacity is tare function. It
has multiple tare function, but total weight of before and after Tare
must be less than its full capacity.
5. PRINT: Press once and send weight information once.
·BOTTOM
AC Adaptor socket
RS232 socket
Recharge Indicator
1
8. Press [UNIT] key, the display will show Fd 0.5 or Fd 3 or Fd 5 or Fd 10. ( press
[ZERO] key to select animal scale filter range among 0.5, 3, 5,10)
9. Press [UNIT] key, the display will show Ft 1 or Ft 2 or Ft 3 or Ft 4. ( press
[ZERO] key to select animal scale filter time among 1,2,3,4)
10. Press [UNIT] key, the display will show U-on or U-off, press [ZERO] to select
U-on or U-off, U-on means you can switch unit between kg and lb, U-of means
lb unit will be disabled.
*** Please kindly note that Kd,Fd,Ft work only in F-Ani mode .
Peak Hold mode
1. In FUNCTION SETTING 5, please choose F-PEA.PEA means peak
hold weighting function activated.
2. Before weighing, please press HOLD key .
HOLD FUNCTION
1) Place the item on the Scale platform.
2) Wait for the stable weight to be displayed.
3) Press the HOLD key. The " . " hold indicator will turn on.
4) Remove the item from the Scale platform. He item's weight reading will
remain on the display. Now you can also select Unit ( Pounds or Kilograms) by
pressing [UNIT] key.(LB cannot be selected if LB is disabled in function setting)
5) Quit HOLD function: Once an item is weighed and the hold function is
enabled, you want to quit HOLD function, press the HOLD key again to cancel
the " . " hold indicator and return the Scale to weight mode.
CAUTIONS:
1. When the recharging sign “ ” indicates, please charge the battery for 8 to
10 hours. When the charging is done, the Orange indicate lights will turn into
Green. Over-time charging will cause permanent damage.
2. To use only the charger (adapter) supplied with the indicator.
3. If after recharging and the battery does not last long, replace with new battery.
6
ON/OFF HOLD
UNIT ZERO
PRINT