LW Measurements DCT50 - Manual (Page 5)

Final Rev 2013.12.20 5
Contents
Section Heading
1 Safety
1.1 Representation and symbols
1.2 Safety recommendations
2 Your weighing machine
2.1 Construction and functions
2.1.1 Construction of the weighing machine
2.1.2 Functions of the weighing machine
2.2 Application, conformity
2.2.1 Correct use of the weighing machine
2.2.2 Conformity
2.3 Data and parameters
2.3.1 Technical data
3 Getting started with your weighing machine
3.1 Unpacking the equipment
3.2 Scope of delivery
3.3 Assembling your weighing machine
3.4 Choice of a suitable location
3.5 Checking the mains voltage
3.6 Leveling the weighing machine
3.7 Calibration of the weighing machine
4 Working with the application menu using the intelligent keypad
4.1
Display messages and key functions
4.1.1 Display messages
4.1.2 Key functions
4.2 Program options
4.2.1 Pieces counting
4.2.1.1 Counting with a known sample weight
4.2.1.2 Counting without a known sample weight
4.2.2 Select a pre-stored unit weight
4.2.3 High/Low Check Weighing when Counting
5 Calibration - using an external calibration weight
6 Maintenance and service
7 Transport and storage
7.1 Transportation and shipping
7.2 Storage