LW Measurements SC 76 - Manual (Page 4)

HOLD FUNCTION
Once the HOLD key is pressed, the weight will remain on the display for 120
seconds after the item has been removed from the scale so the weight can
easily be read.
1) Place the item on the scale platform.
2) Wait for the stable weights to be displayed.
3) Press the HOLD key. The “HOLD” hold indication will turn-on.
4) Remove the item from the scale platform. The item’s weight will remain on
the display for 120 seconds. You can now also convert this to other
measures (example: lb or kg) by pressing the UNITS key
5) To quit HOLD function, press the HOLD key again.
FUNCTION SETTINGS
1. With the scale in OFF position, press and hold the [ZERO/TARE] key and
turn on the scale by pressing [ON/OFF] key. The display will show A_ON
or A_OFF.
2. Auto shut off mode.
Press the [ZERO/TARE] key, the display will show A_ON or A_OFF.
A_ON means the auto shut off function active. Press [ZERO/TARE] again,
the display will show A_OFF, this means the auto shut off function inactive.
3. Auto backlight mode.
Press [UNITS] key, the display will show L_ON or L_OFF, press
[ZERO/TARE], selection display L_ON, this means backlight function
active, press [ZERO/TARE] again, the display will show L_OFF, this
means backlight function inactive.
3. Auto HOLD mode.
Press [UNITS] key, the display will show H_ON or H_OFF, press
[ZERO/TARE], selection display H_ON, this means AUTO-HOLD function
active. Press [ZERO/TARE] again, the display will show H_OFF, this
means AUTO-HOLD function inactive.
4. Return to weighing mode.
Press [ON/OFF] to turn the power off, press [ON/OFF] again to turn on the
power and the scale will return to weighing mode.
3
WEIGHING
Whenever possible, please allow the scale to warm up for several seconds after
first turning the power on so that the scale will function properly and accurately.
Error messages
Err-O: Overload
Lob: Low battery
Weighing Procedures
1. Press [ON/OFF] to turn on the scale. The display will count down from
“99999” to “11111” for a few seconds and “0” will appear on the display.
2. Select the weighing unit by pressing [UNITS] key.
3. The selected unit will be display on the cursor next to the weight value.
4. Start weighing. Make sure the display is “0”, if not press the [ZERO/TARE]
key to zero the scale.
5. If you are using a container or tray, place the empty container on the scale,
wait for the stability indicator to be displayed, press [ZERO/TARE], and the
display will read “0” with the tray or container on top.
6. Place your objects to be weighed on the container. The weight will be
displayed once the scale is stable.
4