Magnepan CC Speaker Stand - Manual (Page 5)

Bass Attenuation
In the unlikely event that the CC Speaker Stand has too much bass relative to your Magneplanar center channel
speaker, a power resistor can be inserted in place of the jumper. A power resistor of ___ watts should be used if
attenuation is needed. Usually, 1 or 2 ohms is sufficient when attenuation is needed. Caution- Using low wattage
resistors could result in overheating of the resistor with the risk of injury or in extreme cases-- fire.
Service and Shipping
In the unlikely event you need service for your CC Speaker Stand, we recommend you return it through your dealer.
They are experienced in providing service and can assist you if the speaker must be returned to the factory. If you
determine you need to return it directly to Magnepan, call for a return authorization and ship the speaker, freight prepaid
to:
Magnepan, Incorporated
1645 Ninth St.
White Bear Lake, MN 55110
1-800-474-1646
Include a note describing the nature of the problem and your return authorization number. Please include your name,
address, and a daytime telephone number.
Fig. 4