Martin Christ Epsilon 2-10D LSCplus - Manual (Page 44)

Freeze-dryer EPSILON 2-10D LSCplus
6 Operation
44
Version 04/2013, Rev. 1.5 of 16/12/2014 • sb
Translation of the original operating manual
Pos: 138 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LSCplus/ 060 -00 50 LSCplus Anl age nsteu eru ng Epsil on - -- --- -- --- --- -- --- -- --- --- -- --- -- --- -- --- --- @ 2 5\m od_ 1404 983 956 815 _68. docx @ 18 369 0 @ 2 @ 1
6.5 LSCplus control system
The control system LSCplus (Lyo Screen Control plus) was specifically
developed for the control of freeze-drying processes. The clear user
interface enables the intuitive operation of the unit.
Fig. 23: Start screen of the LSCplus control unit (example)
Pos: 139 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1
Pos: 140 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LSCplus/ 060 -00 50- 001 0 Bedi eno berfl äche @ 2 5\m od_1 404 983 958 996 _68. docx @ 18 371 8 @ 3 @ 1
6.5.1 User interface
The system is operated via a touch panel, i.e. by touching the buttons on
the display. Every button is marked by a frame. Pressing the button
activates the associated function. Depending on the function, a dialog box
opens, a value can be changed, or a transaction can be confirmed.
Fig. 24: Buttons are marked by a frame