DCS -CGT - Manual (Page 4)

3
Features
The Professional Tandoor by DCS comes with these standard features.
● Input rating = 70,0000 BTU/HR
● Overall dimensions 34” wide x 36” high x 35” deep.
● 1 inch thick ceramic bowl to retain heat longer and more evenly.
● All stainless steel exterior.
● Ceramic bowl preheats to 800F in approx. 45 minutes.
● Two heavy round cast iron burners each controlled separately for complete temperature control.
● 100% safety shut off standing pilot. (Main burner shuts off if pilot goes out).
● Automatic standing pilot main burner ignition.
● Unit comes with 6 inch legs.
● Large grease & crumb tray below burner.
● Rear 3/4” NPT manifold connection.
● Front accessible controls.
● 1/2” thick stainless steel plate above burners deflects heat evenly into the bowl.
● Full length towel bar.
● UL, CUL, & NSF approved.
● Nat Gas 6” W.C L.P. gas 10” W.C.
● Optional Features
● Swivel casters w/front locking brakes (shown below).
● 5 foot quick disconnect flex hose.
● Stainless steel skewers.
● Stainless steel grease & crumb tray.
Stainless
Steel Exterior
Full Length
Towel Bar
Optional
Casters