Troubleshooting guide – Denon DVD-755 User Manual

Page 26

Advertising
background image

– 26 –

EN

TROUBLESHOOTING GUIDE

If the DVD player does not perform properly when operated as instructed in this Operating Instruction, check the player, con-
sulting the following checklist.

NOTES:

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Operating

Instruction for details on correct operations.

• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.

Problem

Solution

Page

– Check if the AC power cord is properly connected.
– Unplug the outlet once, and wait for 5-10seconds and

then plug it in again.

– Check if the TV is switched on.
– Check the video connection.
– Check the VIDEO/AUDIO cable connections to the TV.
– When there is video output from the DVI-D OUT

connector, no signal is output from the COMPONENT
VIDEO OUT jacks. When using these jacks, set DVI
output mode to OFF.

– Check if the INTERLACE/PROGRESSIVE mode is set

correctly according to your TV.

– Sometimes a small amount of picture distortion may

appear.
This is not a malfunction.

– Connect the player directly to the TV.

– Connect DVD player directly to the TV.
– Make sure the disc is compatible with the DVD player.

– Adjust the volume.
– Check that the speakers are connected correctly.

– Check the digital connections.
– Check if the audio format of the selected audio

language matches your receiver capabilities.

– Use a DIGITAL AUDIO OUT jack when outputting the

DTS sound.

– Check the disc for fingerprints/scratches and clean with

a soft cloth during playback wiping from center to edge.

– Clean the disc.

– Clean the disc.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– Cancel the parental lock or change the control level.
– Insert a correct disc that plays on this player.

– Reset the player by switching the player off, then on

again.

– Aim the remote control directly at the sensor on the

front of the player.

– Reduce the distance to the player.
– Replace the batteries in the remote control.
– Re-insert the batteries with their polarities (+/– signs)

as indicated.

– To completely reset the player, unplug the AC cord from

responding the AC outlet for 5-10 seconds.

– Operations may not be permitted by the disc.

Refer to the instructions of the disc.

– Use a commonly available cleaning CD/DVD to clean

the lens before sending the DVD player for repair.

–The angle cannot be switched for DVDs which do not

contain multiple angles. In some cases multiple angles
are only recorded for specific scenes.

– Check the “RATINGS” setting.

– Enter the default password “4737”, then your forgotten

password will be cleared.

No power

No sound or picture

Distorted picture

Completely distorted picture or black/white
picture with DVD

No sound or distorted sound

No audio at digital output

No DTS sound output

Picture freezes momentarily during playback

Disc cannot be played

No return to start-up screen when disc is
removed

The player does not respond to the remote
control

Buttons do not work or player stops
responding

Player does not respond to some operating
commands during playback

DVD player cannot read CDs/DVDs

Angle does not switch

Playback does not start when the title is selected

The password for rating level has been
forgotten

––
––

––

13, 14
12, 13
14, 15

23

––

13

13

6

––
––

12

21, 23

12,24

25

25

25
––
––
24

6

––

––

––
10
10

––

––

––

––

24

24

E59E0/E5UD(EN).qx3 04.7.16 8:19 AM Page 26

Advertising
This manual is related to the following products: