Mossberg MVP FLEX - Manual (Page 7)

PART N0. 101484 REV. A 7
TO ATTACH RECOIL PAD
Before making any buttstock changes, move the safety button fully rearward
to the “ON” (SAFE) position and visually and physically check the chamber
and magazine to be certain the rifle is unloaded. Remove the bolt and
magazine, and be sure to keep the muzzle pointed in a safe direction. Refer
to your firearm’s owner’s manual for additional safety and functional
information.
Identify the bosses on the recoil pad (Fig. 9) and the pear-shaped holes in
the recoil pad release lever (Fig. 10).
RELEASE
BOSSES PEAR-SHAPED HOLES LEVER
Fig. 9 Fig. 10
Push bosses on recoil pad through the pear-shaped holes in recoil pad release lever
(Figs 11 & 12). Push the pad towards the top of the stock and in until the release
lever audibly clicks into place. Tug and twist the pad to ensure it is properly seated
and perform
a function test per instructions in your firearm’s owner’s manual.
Fig. 11
Fig. 12