P.I. Engineering XK-4 Stick - Manual (Page 2)

2
Mac Users
Install ControllerMate for X-keys from the enclosed disc or visit the Apple page
in the Software section of our website for a free download. ControllerMate for
X-keys is published by OrderedBytes in partnership with P.I. Engineering. For
full programming instructions and support, please visit
www.orderedbytes.com/controllermate/.
Developers
P.I. Engineering offers a free Software Development Kit with code samples in
C#, C++ and .NET. We also offer a Linux SDK and Android code samples.
Please visit the Developers section on our website: xkeys.com/develop.php.
Support
Should you encounter difficulty with the installation or programming, please
open the MW3 or ControllerMate Help File or check the troubleshooting guide
on our web site. You may also contact technical support.
USA: [email protected] | Phone: 1-517-655-5523
UK: [email protected] | Tel + 44 (0)1869 338428
Compatibility
X-keys USB devices require MacroWorks 3 for Windows XP, Vista, or 7 or
ControllerMate for Mac OS X. The X-keys Stick
also has a “Hardware Mode”
which gives it the ability to mimic a USB keyboard or mouse on any USB
enabled operating system (including Linux). Learn more about Hardware
Mode on our web site or contact our Technical Support Department
([email protected]).
Identifying the Keys
Select legends from the pre-printed sheet or use the blank legend sheet to
create your own key legends. The keycap lenses snap off with a fingernail or
small screwdriver. Place the legend inside the lens, and replace it. The key
caps hold a legend 0.575" wide and 0.5" high (14.6mm x 12.7mm). Other
options are available for printing legends for multiple units. Contact our Sales
Department ([email protected]) for more information.
Customization
The electronic design of the X-keys Stick is such that the stick may be cut off
to any length after the second key. P.I. Engineering will perform this service in
our lab for a fee including testing to maintain the warranty, or you may contact
us for specific instructions if you wish to do it yourself.