ParkZone PKZ1600 - Manual (Page 5)

5
Making Trim Adjustments
to the Horizontal Stabilizer
1. Turn on transmitter.
2. Install a fully charged battery into the battery com-
partment and secure it with the included Velcro.
3. Set the elevator trim lever to center.
Step 5
few “clicks” up or down as needed.
Step 6
��������������
�������������������
������������������
����
��
Motor Test
Warning: Keep everything clear of the propeller
before starting the motor test so you do not dam-
age any property or harm anyone.
1. Make sure the throttle slider is in the “off” posi-
tion.
2. Turn on the transmitter.
3. Plug the flight battery into the white lead inside
the fuselage.
4. Make certain the elevator is set to neutral with
the horizontal stabilizer. Do this by removing the
clevis from the control horn and turning it on
the pushrod as needed. Once the adjustment is
made, reattach the clevis.
5. If you feel more adjustments are necessary while
in flight, move the trim lever on the transmitter a