Dual XNAV9525 - Manual (Page 23)

23
XNAV9525 GPS NAVIGATION SYSTEM
MP3 Player
The XNAV9525 includes advanced MP3 playback software
to enable you to play MP3 files stored on the hard drive or
from most standard USB storage devices.
Press SYSTEM on the remote control to access the System
Menu. Select “MP3” to access the MP3 player menu. If
an external USB storage device is detected, the unit will
automatically begin to play any MP3 files loaded on the
USB device. If no USB device is detected, MP3 files must
be searched and loaded into the MP3 index before being
played. Refer to the Data Manager operation on page 26 for
details on how transfer MP3 files to the hard drive.
The playback screen shows the MP3 file playlist and a
status indicator bar for file selection/playback along with
function buttons along on the bottom. Use the ▲▼◀▶
buttons to navigate the file list and press
ENTER to select
the file for playback. The file currently selected is shown
in red. The file currently being played will be highlighted in
green as shown below.
System Menu
MP3 Player
MP3 Filenames
Volume Level
Playback Position
Currently Playing File