Peg-Perego Primo Viaggio 4-35 User Manual

Page 25

Advertising
background image

- 25 -

Take the car seat off the base. Rotate

the handle in the upright position by

pressing the buttons on the side of

the handle (a). Place your hand on the

top of the seat back and pull up on

the release lever with your fingers. Pull

the car seat up at the same time (b).

Note: Pulling near the center of the lever

provides the easiest release.
Turn the knob left or right to adjust the

base foot (c).

Make sure that your vehicle is parked

on level ground. Position the base rear

facing in the back seat of your vehicle.

Check the level indicator on the top surface

of the base and further rotate the knob

to make sure that you reach the proper

angle (d). Follow the visual instructions

placed on the side of the indicator in

order to set the angle corresponding to

the weight of your child.

How to level the base in the vehicle

Advertising