Peg-Perego Primo Viaggio SIP 30-30 - Manual (Page 28)

⇠ 28
How to Buckle Your Baby into the Car Seat
This restraint uses a 5-point harness
system to secure your baby into the car
seat. See illustration on page 8.
1• Push the red buckle button to
release the harness. Press and hold
the harness adjuster button while
pulling the shoulder straps out
undo the chest clip (point 5). Lay the
shoulder straps to the side to make
room for your baby.
2• Put your baby in the car seat with
their bottom and back flat against
the child restraint. Bring the two
shoulder straps over your baby’s
shoulders. Make sure the straps are
not twisted behind the backrest or
over your baby’s chest.