Physitemp Instruments BFS-MP CSA - Manual (Page 2)

APPENDIX 2
OPERATING INSTRUCTIONS
ECV-1 ELECTRICALLY OPERATED SOLENOID VALVE
The ECV-1 is supplied with an AC line cord and 12 VDC desktop power supply.
1 Connect the line cord to the socket on the power supply and to the rear auxialiary outlet on the
BFS-MP controller.
2 Connect the 12VDC power supply to the input socket on the front of the ECV-1.
3 Connect the water tubes as shown below:
11
ECV-1
Freezing
Stage
Extension tube with
female connector
TO WASTE
FROM WATER SUPPLY
Extension tube with 1
female connector and
1 universal connector
Female connector Male connector
Stage has 2 water tubes
with male connectors
EB BFS-MPCSA 6310 Rev2