Optional remote control accessories, Local codes, Product features – Desa EFS10TN User Manual

Page 4: Unpacking

Advertising
background image

107032-01E

For more information, visit www.desatech.com

For more information, visit www.desatech.com

4

LOCAL CODES

Install and use fireplace with care. Follow all local codes. In the
absence of local codes, use the latest edition of The National Fuel
Gas Code ANSI Z223.1/NFPA 54
*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

OPTIONAL REMOTE CONTROL ACCESSORIES
LOCAL CODES
PRODUCT FEATURES
UNPACKING

OPTIONAL REMOTE
CONTROL ACCESSORIES

(For Remote-Ready Models Only)

There are four optional remote controls that can be purchased
separately for Remote-Ready Models only:
• wall switch

• hand-held ON/OFF remote

• wall thermostat

• hand-held thermostat remote

See Accessories, pages 38 and 39.

PRODUCT FEATURES

SAFETY PILOT

This fireplace has a pilot with an Oxygen Depletion Sensing (ODS)
safety shutoff system. The ODS/pilot is a required feature for vent-free
room fireplaces. The ODS/pilot shuts off the fireplace if there is not
enough fresh air.

PIEZO IGNITION SYSTEM

This fireplace has a piezo ignitor. This system requires no matches,
batteries, or other sources to light fireplace.

THERMOSTATIC HEAT CONTROL FOR
THERMOSTAT-CONTROLLED MODELS

Thermostat-Controlled models have a thermostat sensing bulb and
a control valve. The thermostat will automatically modulate the heat
output to maintain a consistent room temperature. This results in
greater fireplace comfort. This can also result in lower gas bills.

UNPACKING

1.

Remove log box and fireplace from carton.

IMPORTANT:

The

fireplace hood is inside the cardboard protective end wrap on
the left side of fireplace (as viewed from front). A decal is on
the outside of the cardboard end wrap stating hood is enclosed
(see Figure 2).

2.

Remove hood from cardboard protective end wrap as shown
in Figure 2.

3.

Remove all protective packaging applied to fireplace for
shipment.

4.

Make sure your fireplace includes one hardware packet.

5.

Check fireplace for any shipping damage. If fireplace is dam-
aged, promptly inform dealer where you bought fireplace.

Figure 2 - Removing Fireplace Hood

IMPORTANT:

THIS PACKAGE CONTAINS A

FIREPLACE HOOD. UNWRAP

CARTON AND REMOVE HOOD

BEFORE DISCARDING

PROTECTIVE PACKAGING.

1

2

Hood

Cardboard
Protective
Fireplace End
Wrap

Hood
Enclosed
Decal

Advertising
This manual is related to the following products: