Pitney Bowes DM900 - Manual (Page 156)

10 • Troubleshooting
10-10 SV60861 Rev. F
Gummed tape is not
wet.
(continued)
Brush not out far enough to reach
tape.
1. Open the side cover door.
2. Tilt out brush holder with one hand and
hold..
3. Remove the brush.
4. Pull out brush and readjust to longer length.
5. Reinstall brush and release holder to return
original position
Valve in moistener bottle cap is
not working.
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Low E-Z Seal® Sealing Solution
message is not working.
Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Tape Feeding Problems
Description Possible Causes Solution
!
"