PocketBook InkPad User Manual
Page 22
Getting Started
22
pre-configure a connection and set an automatic connec-
tion. To proceed, follow these steps:
1. At the notification bar go to
Settings > Network
> Network Access;
2. Select
On
for the
Network access
checkbox and
then further settings appear:
Auto connection
,
Connec-
tion to a hidden network
, and a list of available Wi-Fi
networks.
NOTE If there are no available networks or the signal strength is
week,
Available networks
are not displayed and instead replaced
by
Scanning
— searching for available networks.
3. To set up connection with a hidden network, open
Connection to a hidden network
and enter its SSID from
the on-screen keyboard in the
Network name (SSID)
field.
4. Select security type in the corresponding list:
•
None
– for an open network;