Usb tethering, Direct tethering, Reverse tethering – PocketBook SURFpad U7 User Manual
Page 15
GETTING STARTED
15
USB TETHERING
Direct Tethering
To share Internet connection from device to computer via USB con-
nection do the following:
1.
Plug your Device into your PC via USB.
2.
Go to
Settings > More… > USB tethering
and put a mark
USB tethering
.
ATTENTION!
Check the box of the USB debugging mode. To turn it off go to
Settings
>
Developer options
and remove the tick in the box
USB debugging
.
3.
Download drivers on your PC from the por
and install them.
4.
Turn on Wi-Fi on your Device and set connection.
5.
After that Internet will be available on your computer.
Reverse Tethering
To share Internet connection from computer to the Device via USB
connection you need to configure some setting of your tablet and PC:
1.
Perform
1-3 items
of the
Direct tethering
tuning.
2.
Go to
Settings – More… -
Ethernet and put a mark Use Ethernet.
3.
The new network connection (local tapping) will be displayed in
Network connections
on your PC, after that you should admit common
access of the new connection to the main PC Internet connection. It
may be also needed to configure additional connection parameters
on your Device, i.e. IP-address, netmask, gateway.
4.
After that Internet will be available on your Device.