Dixon SpeedZTR 966494901 - Manual (Page 17)

ContRoLs
17
This operator’s manual describes the Dixon Zero Turn
Rider. The rider is fitted with a Briggs & Stratton 16
HP* four-stroke overhead valve engine. Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
Cutting height handle 1.
Park brake 2.
Choke/throttle control 3.
Ignition switch 4.
Motion control levers 5.
Blade control lever 6.
Fuel tank cap 7.
Fuel shut off valve 8.
Bypass linkage 9.
Control Locations
1 2 3 4
5 6 8 9 7
8058-070
*The power rating of the engines indicated is the average
net power output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard
J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed
in the final machine will depend on the operating speed,
environmental conditions and other variables.