Dixon 115 239947 - Manual (Page 9)

9
ASSEMBLY
Install containers on support frame, overlapping 1.
containers at center tube.
Note: One container should always overlap the
other container at the center tube.
Close cover and lock latch handle over support
2.
tubes.
Support Frame
Latch Handle
WARNING!
DO NOT operate mower unless
containers are properly installed.
Containers are subject to wear and
deterioration. Check containers
frequently, replace when cracked or
damaged. Use only a recommended
replacement containers.
11
CHUTE/HOOD INSTALLATION
10
CONTAINER INSTALLATION
Latch upper chute to middle chute. 1.
Insert upper chute into gasketed opening on the 2.
hood assembly.