Qsonix Q110 - Manual (Page 10)

10
On Screen Display (OSD) Control Options
Control Description
Brightness Increases or decreases brightness
Contrast Increases or decreases contrast
H-Position Moves the screen left or right
V-Position Moves the screen up or down
Phase Increases or decreases the snow noise of the image
after auto adjustment is made.
Clock The dot clock is fine-adjusted after auto adjust.
OSD H-Position Moves the OSD position horizontally on the
screen. When the button is pressed, the OSD control menu
will move to the right side of the screen. Likewise, when the
button is pressed, the OSD control menu will move to the
left side.
OSD V-Position Moves the OSD position vertically on the
screen. When the button is pressed, the OSD control menu
will move to the top side of the screen. Likewise, when the
button is pressed, the OSD control menu will move to the
lower side.
Color Balance Press or to select 9300, 6500, 5500, 7500
and USER. Only when selecting USER can you make
adjustments to the R/G/B content.
Press Enter to restore to factory default setting.
Auto-Adjust Press Auto to enable this function. The Auto-
Adjust will automatically adjust V-Position, H-Position, Clock
and Clock-Phase.
Recall Defaults Returns the monitor to its default settings.
OSD Language Select from English, French, German
,Spanish and Japanese.
Information Description Indicates the current resolution, H-
Frequency and V-Frequency.
Touchscreen Basics
The Qsonix system is operated from the touchscreen controller. Even if you have never worked with a
touchscreen you will find that it is very simple— with only a little practice you will become comfortable in its use.
Here are some more tips to help you to get the most out of your Qsonix system:
 Don’t be afraid to press hard on the touchscreen glass, it is designed to withstand considerable
pressure. You will find that a slightly harder press will yield better control.
 Clean the cabinet, glass, and controls with a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of abrasive pad scouring powder or solvent, such as alcohol or benzene.
 Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as a pen or
screwdriver. This type of contact may result in a scratched glass.
 Avoid using the touchscreen while your hands are wet or greasy, this reduces the effectiveness of the
touchscreen.
 Experiment a bit to learn what touch pressure and finger placement works best for you.