Qsonix QJB110 - Manual (Page 11)

15
Starting your Jukebox for the First Time
Once you have plugged in all the necessary cables, you are ready to power-up the system and begin using it.
If you haven’t done so already, connect the power cord to receptacle the back of the cabinet and plug into power source.

Turn the main power switch to the ON (1) position. (inside the cabinet)

The switch should light up.

Turn the power switch on the computer core to the ON (1) position.

Press the blue power button on the front panel.
The computer core and lights will power up. After loading the Operating System, the application software loads and the
main screen will appear. This entire process takes a few minutes.
Note: The QJB110 has been designed to be left in the “Power on” state, and does not need to be turned off when
not in use. The system may be completely turned off by pressing the “power” button located in the center of the
front panel.