Setting up your player, Connecting your player, Connecting to a tv – Dynex DX-HTIB User Manual
Page 10
10
DX-HTIB
Setting up your player
Connecting your player
Before connecting your player, refer to the picture below. Each connection must be solid.
Disconnect the power cables on all elements of the system until you have finished all of the
connections.
Connecting to a TV
To connect to a TV:
1 Unplug the TV and your player.
2 Connect your TV using one of the following methods:
• Best - If your TV has an HDMI connection, use an HDMI cable to connect the player
to the TV.
• Better - If your TV has component connections (Y, Pb/Cb, Pr/Cr), use a three-cable
component cable to connect the player to the TV-set. You will also need to connect
the Audio (L & R) if you use this connection.
Player
External DVD player
Right speaker
Subwoofer
Surround right
Surround left
Left speaker
Center speaker
TV
DX-HTIB_10-0823_MAN_ENG_V3.fm Page 10 Thursday, July 29, 2010 2:57 PM