RAVE Sports Aqua Jump Eclipse 200 Water Park - Manual (Page 9)

A special inflation adaptor is included with this product. If you are
using the RAVE Sports High Speed Inflator (Part #01083), simply lock
the adaptor onto the end of the inflation hose and insert into the
valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor will
automatically open the valve when
inserted and will close the valve when
removed. You do not need to manually
open/close the valve when using this
special adaptor.
If you will be using another inflation device
with a larger nozzle, use the 1 ¼” diameter
coupler (included) between the valve
adaptor and the hose of your inflator.
Make sure the hose is attached to the
blower port of the vacuum for inflation.
Insert the adapter into the air valve and
lock into place by turning clockwise.
Inflate the tube to approximately 80-90% full (approx. 4 minutes.)
The tube will be erect but very soft at this stage. Do not inflate fully
until after the springs are attached.
Attach the Anchor Harness
(Models AJ150, AJ200)
Attach the anchor harness following the
instructions included with the harness.
Note: it is very important this harness be
connected to the proper anchor points. Doing so
Adaptor Coupler
8