RAVE Sports Classic Aqua Jump 25' Water Park - Manual (Page 14)

13
to waves and normal use. An Anchor Connecting System
(part # 01024) is available through RAVE Sports, and
does include a shock cord (bungee).
• Please consult with local authorities regarding any specific
anchoring restrictions in your area.
• Set anchor in position in water and use float on the anchor
line to locate.
• Move jump to the water with the aid of 2-4 people.
Carefully carry the Aqua Jump and rest it in shallow water.
CAUTION: To avoid risk of puncture or damage to the
product, DO NOT DRAG the Aqua Jump to the water.
• Attach anchor line (not included) securely to the swivel or
ring on center of the rope harness on the underside of the
Aqua Jump. Adjust length of anchor line so that it is
approximately 1-2 ft. longer than the depth of the water.
The RAVE Sports anchor bungee will provide 2 ft. of
stretch to absorb waves and any vertical bouncing motion.
To help prevent flipping of your jump in high wind
conditions, do not exceed 3 ft. of slack in the anchor line.
NOTE: More slack will improve anchor holding performance,
but too much slack may be sufficient line to allow the Aqua
Jump to stand on edge and flip over in strong winds. For
best results, maximize your anchor holding power via more
weight or a different type of anchor and minimize your
anchor line length.