RAVE Sports Bongo 10 Bouncer Water Park - Manual (Page 7)

Inflating Your Bongo
Step 1
Lay the Bongo on a flat surface. Make sure there are no sharp objects
under the product that might puncture the tube.
Step 2
Locate the valve of the Bongo and unscrew the cap. We recommend
using the High Speed Inflator/Deflator from RAVE Sports to inflate
and deflate. (Part #01083)
A special inflation adaptor is included with this
product. If you are using the RAVE Sports High
Speed Inflator, simply lock the adaptor onto
the end of the inflation hose and insert into the
valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor will automatically open the valve
when inserted and will close the valve when removed. You do
not need to manually open/close the valve when using this
special adaptor.
If you will be using another inflation device
with a larger nozzle, use the 1 ¼” diameter
coupler (included) between the valve adaptor
and the hose of your inflator. Make sure the
hose is attached to the blower port of the
OPEN
CLOSE
To lock open valve, depress the stem and
rotate ¼ turn clockwise. To close valve,
depress the stem and rotate ¼ turn
counter-clockwise. The valve stem should
be in the depressed position while inflating.
Replace cap on valve after inflation to
ensure air tight seal.
Adaptor Coupler
6