Dixon ZTR RAM 50 - Manual (Page 23)

23
BLADE DRIVE SWITCH TEST:
a) Put parking brake in ON position.
b) Swing out control levers.
c) Engage blade drive switch.
d) Turn ignition switch to START.
Engine should not turn over or attempt to start.
SEAT SWITCH TEST:
a) In a SAFE AREA away from bystanders,
start the engine.
b) Leave levers swung out and parking
brake ON.
c) Engage blade drive.
d) Raise slightly off seat.
ENGINE SHOULD STOP!
NOTE: If Any Safety Check FAILS, Do Not
Operate The Mower until the system
has been checked and repaired by an
Authorized Dixon Dealer.
TESTING OF SAFETY INTERLOCK
SYSTEMS:
OPERATION INSTRUCTIONS