Delphi XpressRC SA10316 - Manual (Page 18)

1
To remove, carefully lift the adhesive pad with your fingers or a spoon . Warming the pad
with a hair dryer for several minutes will help soften the adhesive .
You can reinstall the swivel mount using the extra adhesive pad .
Step : Connect your Xpress
RC
.
1 Plug the antenna into ANT IN on the cradle .
 Plug the power adapter into DC IN on the cradle .
 Plug the audio adapter into AUDIO OUT on the cradle .
• Use the Cassette Adapter if your vehicle has a built-in cassette player .
• Use a mini audio cable (sold separately) if your vehicle has
an audio input jack .
 Insert the cradle into the mount .
 Insert your Xpress RC into the cradle .
NOTE! If your car does not contain a cassette player or an audio input, you will need to
use either the XM SureConnect (sold separately) or the FM Direct adapter (sold
separately) .
Vehicle Installation