Rocktron VersaTune - Manual (Page 6)

MUTE BUTTON - Use this button to MUTE the output for silent tuning. When MUTE is active, the MUTE
LED (Point 4) will be “ON” or “LIT”. This button mutes both Output 1 and Output 2. MUTE LED - This
LED works in conjunction with the MUTE BUTTON. When the input is MUTED, the MUTE LED will be
Lit. No sound will be passed through either output. This LED also works in conjunction with the MUTE
FTSW (footswitch) jack on the back panel.
UP BUTTON - This button is used in conjunction with the “TUNINGS WINDOW” - see point 14. Press this
button to move UP through the lists of tunings.
DOWN BUTTON - This button is used in conjunction with the “TUNINGS WINDOW” - see point 14. Press
this button to move DOWN through the lists of tunings.
NOTE DISPLAY - This window will show you the note that is being played.
SHARP INDICATOR - This indicator (#) will “light” if the note being played is “SHARP”
TUNINGS WINDOW - This window shows you over a hundred different types of tunings and is used as a
guide to help you tune your instrument to the desired tuning. This window is used in conjunction with the UP
Button (point 10) and the DOWN Button (Point 11) to select the desired tuning you would like displayed in
the window. For more information see section called “TUNINGS WINDOW” later in this manual.
ON/OFF SWITCH - This is the power “ON/OFF” switch for the VersaTune.
TUNING LEDS SHARP/FLAT LEDS - When the note being played is IN TUNE the GREEN LED in the
center of the LED panel will light. The RED LEDs show you if your note is Sharp or Flat. RED LEDs to the
right of the GREEN LED are sharp and the string should be tuned down. The farther right the LED is away
from the GREEN IN TUNE LED the more the note is SHARP. RED LEDs to the left of the GREEN LED are
flat and the string should be tuned up. The farther left the LED is away from the GREEN IN TUNE LED the
more the note is flat.
In PRECISION MODE the LEDs are opposite. The IN TUNE LED will be RED and the out of tune LEDs
are GREEN. The GREEN LEDs show you if your note is Sharp or Flat. GREEN LEDs to the right of the
RED LED are sharp and the string should be tuned down. The farther right the LED is away from the RED
IN TUNE LED the more the note is SHARP. GREEN LEDs to the left of the RED LED are flat and the string
should be tuned up. The farther left the LED is away from the RED IN TUNE LED the more the note is flat.
9
10
11
12
13
14
15
16
Front Panel Features...continued...