Rocktron MIDI Mate - Manual (Page 15)

12
MIDI Mate™ Manual
BANK
INSTANT
CONTROLLER
ACCESS 2ND 0 1 2 3 4
5 6 7 8 9
BANK
(ADJUST)
EDIT PRESET
SELECT
EDIT FUNCTION
SELECT
STORE
access mode. To change preset banks, press the 2ND button so that the 2ND
L.E.D. is lit, then press the Bank "
á" or "â" buttons to select the desired
bank. Presets are grouped in banks of 5 in the Controller Access mode.
Therefore, if you are currently in bank 55 and button 1 is pressed, preset 56
will be recalled and the L.E.D. above button 1 will be lit. Consider each
button# as a value that will be added to the current blinking bank# if pressed.
preset should be "on", then that status must be stored "on" for that
preset, and for every preset the control is desired "on".
Preset Buttons
Controller Buttons
Set assigned buttons (see "Controller Assignment Edit" section) and set controller MIDI channel (see "MIDI
Channel Edit" section).
L.E.D. "on" sends control ON command (control value of 127).
L.E.D. "off" sends control OFF command (control value of 0).
Button functions in Controller
access mode: TITLES
MIDI CHANNELS
CONTROLLER ASSIGN
PROGRAM CHANGES
MIDI 99 99