Rocktron Velocity V10 - Manual (Page 2)

Your Rocktron Velocity V10 amplifier has been designed to comply with the following Standards
and Directives as set forth by the European Union:
Council Directive(s): 89/336/EEC, 73/23/EEC, 76/769/EC, 1994/62/EC, 2000/
53/EC, 2002/95/EC
Standard(s): EN55022, EN50082-1, EN60065
This means that this product has been designed to meet stringent guidelines on how much RF
energy it can emit, and that it should be immune from other sources of interference when properly
used. Improper use of this equipment could result in increased RF emissions, which may or may not
interfere with other electronic products.
To insure against this possibility, always use good shielded cables for all audio input connections.
This will help insure compliance with the Directive(s).
Copyright © 2006 GHS Corporation
All Rights Reserved.
Power Output
Speakers
EQ
Headphone Output
Channels
Dimensions
Weight
Power Requirements
Fuse
10 Watts
1 x 6.5” Custom Voiced Velocity Speaker by Rocktron
Bass
Treble
One 1/4” jack
DISTORTION Switch
256mm(W) x 152mm(D) x 304mm(H)
10” x 6” x 12”
9.9lbs (4.5KG)
100 Volts AC 50/60Hz or 117 Volts AC, 60Hz
or 220/240 Volts AC, 50/60Hz, as specified on chassis
100-120V - use F500mA
220-240V - use F300mA
V10 Specifications
2006-0001
Rev. 8/01/06